High insulation and optimum price / performance ratio
In many single-family homes, there are some potential to the insulation to improve. Exterior walls and the outside area in the ground can usually not itself isolated in the basement ceiling or the floor but this is easily possible. The question is what material you should use? Stone and glass wool and various boards such as EPS, PUR, XPS and fibreboard are available. These materials have a thermal conductivity of 0.03 to 0.045. When analyzing the cost you see that working more falls significant than the cost of materials, that is it is not worth saving in material costs. We recommend this special PUR plates with a sensationally low thermal conductivity of 0.020 W / (m · k). Either you have an almost twice as good insulation compared to other plates or you can use the insulation with half strength perform what example in basement ceilings is a great advantage (headroom). The plates are aluminum clad, but to be painted with normal dispersion and PUR foam such as SikaBond FoamFix stick on almost all materials and side seal with the same material.
Size: 1200 x 600 x 30mm (units supplied covenant a 16 plates Total 11:52 m2)
Material: polyurethane laminated by special procedures prepared
weight: 30 kg per m3
water vapor permeability: No
U-value: 0.63 W / m2K (watts per square meter and ° C)
thermal conductivity (value): 0.020 W / (m · k)
Operating temperature: -30 ° C to + 90 ° C
compressive strength: small, not suitable for pressure-loaded applications
fire: fire index 5.3
applications: flat roof, sloping roof, screed floor, basement ceiling
The following thicknesses are available: 20, 30,40, 50, 60, 70, 80, 100, 120, 140, 160, 180, 200 mm
The price refers to a minimum purchase of 5 frets, other quantities on request.