PowerGrid 600 Modular Waterproof Power Inverter 600 Watt

These inverters are built for outdoor use and are resistant to rain and heat. By using first-class electronic components, the inverter works flawlessly for decades even under extreme conditions. Since each solar module has a power inverter, the shading problem is solved, which can cause headaches for series-connected solar modules.

With very small Plug & Play systems nothing has to be installed at all, the inverter is screwed directly to the module or to the frame.

These line inverters are especially suitable for very small systems, systems that are being extended piece by piece, or roofs with individual surfaces with different orientation. In the event of an inverter failure, only one module is affected, with conventional string inverters this affects 20 to more than 100 modules.

The installation is very simple, the devices can be like any household appliance plug into the 230V outlet.

 

Technical specifications:

Maximum photovoltaic power: up to 800 watts (the inverter has 2 MPP trackers where one solar module can be connected to a maximum of 400 watts)
Nominal input voltage range: 16 - 60 Volt DC
MPPT range: 29 - 48 volts DC
Max. Input current: Two inputs a each 11.5 amps
If the solar module is oversized, automatic internal limitation
DC connector: Multi Contact MC4
Output voltage: 230V 50 Hz
AC rated power: 600 W
Maximum efficiency: 96.5%
Dimensions: (H x D x W) 28 x 170 x 250 mm
Weight: 2.8 Kg
Operating temperature: -40 ° C to + 65 ° C
Installation: Outside IP 67
AC and DC side galvanically isolated via transformer